Novak Brushless Speed Control: Crusher Simple-Tuner Prof User Manual
Browse online or download User Manual for For the car Novak Brushless Speed Control: Crusher Simple-Tuner Prof. Novak Brushless Speed Control: Crusher Simple-Tuner Profile Cheat Sheet (14) User Manual [en] [de] [pl] [cs]
- Page / 1
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1 2 3 4 5 6 7 8 9 10
1 Profile Select x x x 1 2 3 4
2 Drag Brake (%) x OFF 3 6 9 15 20 25 30 40 50
3 Min Brake (%) x 0 3 6 9 12 15 18 20 30 45
4 Brake Freq (KHz) x 1.5 2 2.2 2.5 3 3.5 4.5 6 7 8
5 Timing (degree) x 0 10 15 18 20 25 28 30 33 35
6 Timing RPM x Low 2 3 4 5 6 7 8 9 High
7 Brake Power (KHz) x x 10 20 30 40 50 60 70 80 90 100
8 Dead Band (%) x x 2 3 4 5 8
9 Drive Freq (KHz) x x 8 10 12 14 16 21 23 26 32 36
10 Min Drivev(%) x x 0 1 2 3 4 6 8 10 12 15
11 Reverse x x x OFF ON
12 Motor Rotation x x x CCW CW
13 Voltage Cut-Off x x x OFF ON
14 Data Reset x
x
NO YES
15 Sensor Test A B C
1 2 3 4 5 6 7 8 9 10
1 Profile Select
x x x 1 2 3 4
2 Drag Brake (%)
x OFF 3 6 9 15 20 25 30 40 50
3 Min Brake (%)
x 0 3 6 9 12 15 18 20 30 45
4 Brake Freq (KHz)
x 1.5 2 2.2 2.5 3 3.5 4.5 6 7 8
5 Timing (degree)
x 0 10 15 18 20 25 28 30 33 35
6 Timing RPM
x Low 2 3 4 5 6 7 8 9 High
7 Brake Power (KHz)
x x 10 20 30 40 50 60 70 80 90 100
8 Dead Band (%)
x x 2 3 4 5 8
9 Drive Freq (KHz)
x x 8 10 12 14 16 21 23 26 32 36
10 Min Drivev(%)
x x 0 1 2 3 4 6 8 10 12 15
11 Reverse
x x x OFF ON
12 Motor Rotation
x x x CCW CW
13 Voltage Cut-Off
x x x OFF ON
14 Data Reset
x x NO YES
15 Sensor Test
A B C
1 2 3 4 5 6 7 8 9 10
1 Profile Select
x x x 1 2 3 4
2 Drag Brake (%)
x OFF 3 6 9 15 20 25 30 40 50
3 Min Brake (%)
x 0 3 6 9 12 15 18 20 30 45
SLIDE THE ESC’s ON/OFF SWITCH TO ‘ON’ POSITION
4 Brake Freq (KHz)
x 1.5 2 2.2 2.5 3 3.5 4.5 6 7 8
5 Timing (degree)
x 0 10 15 18 20 25 28 30 33 35
6 Timing RPM
x Low 2 3 4 5 6 7 8 9 High
7 Brake Power (KHz)
x x 10 20 30 40 50 60 70 80 90 100
8 Dead Band (%)
x x 2 3 4 5 8
9 Drive Freq (KHz)
x x 8 10 12 14 16 21 23 26 32 36
10 Min Drivev(%)
x x 0 1 2 3 4 6 8 10 12 15
11 Reverse
x x x OFF ON
12 Motor Rotation
x x x CCW CW
13 Voltage Cut-Off
x x x OFF ON
14 Data Reset
x x NO YES
15 Sensor Test
A B C
1 2 3 4 5 6 7 8 9 10
1
Hill/Hold/Drag Brake
x OFF 20 45 75 95 P1 P2 P3 P4 P5
2
Brake Freq (KHz)
x 1.5 2 2.2 2.5 3 3.5 4.5 6 7 8
3
Rock Boost™
x OFF ON
4
Dead Band (%)
x x 2 3 4 5 8
5
Drive Freq (KHz)
x x 8 10 12 14 16 21 23 26 32 36
6
Min Drivev(%)
x x 0 1 2 3 4 6 8 10 12 15
7
Motor Rotation
x x x CCW CW
8
Voltage Cut-Off
x x x OFF ON
9
Data Reset
x x NO YES
10
Sensor Test
A B C
1
CONNECT THE ESC TO A FULLY CHARGED BATTERY
PACK, A RECIEVER, AND THE MOTOR’S SENSOR
HARNESS
2
WWW.TEAMNOVAK.COM
© 2014 NOVAK R/C, INC. All Rights Reserved Printed 6-17-14
PROFILE 1
BASHING
LED COLOR >
Standard operation with reverse disabled, timing
values active, and low power brakes. Doing a little
speed run testing, you can use this profile to save a
little time and start out safe.
540 / 550 (2S-3S) / 4-Pole Motor Compatible.
# LED BLINKS
# LED BLINKS
PROFILE 4
PROFILE 3
Standard operation with reverse.
Recommended for 4x4 SCT / Bashing.
540 / 550 / 4-Pole Motor Compatible.
Standard operation with reverse disabled.
Defaults set with no timing for “blinky” mode racing.
Great starting profile for club and spec racing.
540 / 550 / 4-Pole Motor Compatible.
RACING
PROFILE 2
# LED BLINKS
LED COLOR >
LED COLOR >
TIMING TEST
crawling
4
WITH ESC AT NEUTRAL, PRESS & HOLD SET
BUTTON.
Release ESC’s SET button once LEDs are lit for the
desired setting;To skip a parameter, continue to press &
hold SET button until desired parameter is reached.
PRESS & HOLD SET BUTTON TO STORE NEW
SELECTION
When SET button is pressed & held for about 1 second,
new selection is stored in ESC’s memory—Status LEDs
will scroll to indicate ESC is exiting programming & ESC
returns to neutral.
3
# LED BLINKS
LED COLOR >
TO CHANGE PARAMETER SETTINGS:
SENSOR TEST: Release button and rotate motor to confirm
sensor operation. Blue/Amber/Red LED will blink as you rotate
the motor pinion shaft.
THROTTLE PROFILE
CHEAT SHEET
Auto-detects Novak Crawling brushless motor. This
mode features Novak's Hill/Hold/Drag Brakes
(Parameter #1 with Power Hill Settings P1-P5), Rock
Boost (Parameter #3; for 2S only), and instant reverse.
There is no time constraint during selection of custom
parameters.
5
SELECT PARAMETER VALUE
LED flashes to indicate active setting (refer to table).
Quick press & release SET button to select desired
setting.
Default settings for each profile highlighted in
orange. Perform One-Touch Set-Up prior to
customization (refer to instructions).
For explanation of programming parameters,
refer to the Crusher Field Guide (available in the
DOWNLOADS section of the Novak website
www.teamnovak.com/downloads). There is a
Field Guide for Standard Modes of operation
(Profiles 1-3) and Crawling Mode.
To revert to the default settings, select
#14 (#9 in the Crawling Profile) parameter
DATA RESET and select two blinks.
1
Summary of Contents
Page 1 - CHEAT SHEET
1 2 3 4 5 6 7 8 9 101 Profile Select x x x 1 2 3 42 Drag Brake (%) x OFF 3 6 9 15 20 25 30 40 503 Min Brake (%) x 0 3 6 9 12 15 18 20 30 454 Brake
Related products and manuals for For the car Novak Brushless Speed Control: Crusher Simple-Tuner Prof
(2 pages)© 2020, manymanuals.com. All rights reserved. | 0.383 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals